Indikator Timbangan Digital A9+P Printer

INTRODUCTION :

Weighing Indicator XK3190-A9+p adopts high precision Σ-Δ A/D conversion Technology, with built-in printer.
Widely applied in electronic Truck scale. floor scale, bench scale and static weighing system.

FEATURES :

• Σ – Δ high precision A/D conversion method, able to process input signal from -16mV to 18mV
• Good consistency, no need to re-calibrate if change the former indicator, high precision
• DC power socket with anti-connect and anti-short circuit protection
• With strong anti- disturbance function

TECHNICAL PARAMETER :

• A/D conversion method: Σ – Δ
• Input signal range: -16mV to 18mV
• A/D conversion code: 1 million code
• A/D conversion speed : 10 times/sec.
• Load cell excitation: DC 5V
• Max.connection number of load cell: 8 at 350 ohm / 16 at 700ohm
• Load cell connection mode: 6 wire, auto compensation for long distance
• Division: 1/2/5/10/20/50/100 optional
• Display: 7 bits 0.8 inch LED,3 level battery indications
• Display range: -99990 ~ 99990 (d=10)
• Clock: Real clock without effect when power off

Score board interface (standard):

• Serial sending signal by current loop with baud rate 600
• Transmission distance: ≤ 50 meters

Communication interface:RS -232/RS422(optional)/RS485(optional)

• Transmission distance: RS-232C ≤ 30 meters
• RS422/RS485 ≤1200 meters
• Baud rate: 600/1200/2400/4800/9600 (optional)

Printer interface: standard parallel output interface

• Data storage: 1000truck record consisting of truck ID and corresponding tare weight 201 cargo ID, 1001 weighting records

Power supply :

• AC 220V(-15% – +10%), 50 Hz(-2% – +2%)
• DC 6V/10Ah external battery rechargeable

FUNCTIONS :

• Built-in micro printer
• AC/DC power supply, rechargeable battery
• Set up zero tracking range
• Zero range: (auto/manual)
• 2-point calibration correction function
• 2-compensation calibration method
• Able to print across and upright weighing bill
• Able to print different statistical reports

1,025 total views, 2 views today